HOME
> Medical Devices / Products list > Koken NeoBreath Single-Tube Type

Koken NeoBreath Single-Tube Type [sterile]

Features

  1. Koken Neobreath is available in the following 3 types: single-tube, multiple-tube, and speech types.
  2. Equipped with an inner cylinder so that the cannula can be easily cleaned (for double-tube and speech types only).
  3. Includes lumen to aspirate fluid deposited on the cuff.
  4. An even pipe surface minimizes irritation to the opening of the tracheotomy or tracheal mucosa.
  5. Allows the patient to perform vocal training with an attached one-way valve (only for speech type).
 

Contents

Koken NeoBreath Single-Tube Type Photo

  1. Main body ( with15M connector)
  2. Dale Tracheostomy Tube Holder (#DAL240)

Inner cylinder or one-way valve cannot be attached to the single-tube type.

Product NO. O.D.(A) Packing
#3271 8mm 5pcs/box
#3272 9mm 5pcs/box
#3273 10mm 5pcs/box
#3274 11mm 5pcs/box
#3275 12mm 5pcs/box
#3276 13mm 5pcs/box
 

Precautions for Use

  • Do not apply any type of lidocaine spray (such as xylocaine pump spray) to this product. The additive in the preparation may eliminate markings or break the cuff (produce pinholes).
  • Please refer to Table 1 below for proper use.
 

Table 1

Application Inner tube fenestration Label color on the outer box and inner bag Letter color on the flame Size indication on the flame (in case of O.D. 11mm) Cuff indicator color
Syngle-tube Type For patients requiring strict respiratory management by connection with respirator, etc. × × Green
Green
Green
Green
OD11 • Green
Green
Double-tube Type For patients with much sputum, and in whom the cannula is apt to be obstructed × white
White
black
Black
OD11 • • black
Transparent
Speech Type For patients undergoing vocal training Light Blue
Light Blue
Blue
Blue
OD11S Blue
Blue
 

How to select the best size for each patient

  • The outer diameter in the product list or indicated on each product corresponds to “Outer diameter (A)” in the table 2 below.
  • Pay attention to the difference between the inner and outer diameter indications when another company's product is replaced.
 

Measurements

Measurements (Figure) O.D.(A),O.D.(B),Inner cylinder I.D.(C),Length of pipe(D)

 

Measurement Table (mm)

O.D.(A)
O.D.(B) Outer tube I.D. Inner cylinder I.D.(C) Length of Pipe(D)
8 9 6.5 5 59
9 10 7 5.5 70
10 11.5 8 6.5 73
11 12.5 8.5 7 73
12 13.5 9.5 7.5 77
13 14.5 10 8.5 78
 

The product here prohibits the following acts.

  • Do not reuse